Quedesamplis.com - Ashdown KLYSTRON C210H-500 - Combo basse 575W, 2x10" + tweeter

AMPLIS ACOUSTIQUES

AMPLIS BASSES

AMPLIS ELECTRIQUES

AMPLIS INSTRUMENTS & VOIX

MINI AMPLIS

AUTRES

retour

Ashdown KLYSTRON C210H-500 - Combo basse 575W, 2x10" + tweeter

KLYSTRON C210H-500 - Combo basse 575W, 2x10" + tweeter

1256,45 €
ou 3x 418.82 euros

Stock : Disponible

Frais de livraison : Livraison gratuite
Référence produit : KLY C210T-500

Plus d'infos :

Contact par mail
Contact par téléphone

Zoom

Garantie : 2 ans
Site du fabriquant : www.ashdownmusic.com


	KLYSTRON C210H-500 - Combo basse 575W, 2x10" + tweeter

The 575-Watt, 2 x10 + horn C210H-500 combo features a single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. A built-in dual band compressor acts separately on the high and low frequency components of the signal to provide precise control, while the on-board sub-harmonic generator turns the Classics into powerhouses of tone.

The inclusion of a 4-way footswitch as standard makes Ashdown Classic amongst the most versatile live performance bass amps in the business, providing control over the compressor, sub-harmonic generator, tube grind and EQ pre-shape.

Central to the performance of the combo is the use of a new, custom developed Neodymium speaker which incorporates a number of advanced features including a cast aluminium chassis with thin brackets to avoid sound wave reflections, a magnet circuit with heat sink rims to ensure rapid heat dissipation and decompression holes in the cone. The result is an ultra-lightweight bass drivers that just keeps getting louder as the level is increased, delivering a powerful, consistent bass tone at all volume levels and with no power loss over long performances.

- Power Output (RMS) 575W
Speaker Configuration 2 x 10 + TWEETER
- Speaker Outputs Minimum impedance 4 Ohms
- Line Input Impedance 22k Ohms, input level 0dBu nominal
- Line Output Impedance 10k Ohms, level 0dBu nominal
- DI Output 600 ohms balanced, level -20dBu nominal
- Tuner Output Impedance 1k Ohms, level 0dBu nominal
- EQ Bass +/-15dB @ 45Hz
- Middle +/-15dB @ 660Hz
- Treble +/-15dB @ 7kHz shelving
- Slider 1 +/-15dB @ 110Hz
- Slider 2 +/-15dB @ 340Hz
- Slider 3 +/-15dB @ 1.3kHz
- Slider 4 +/-15dB @ 2.6kHz
- Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave
- Effects Send Impedance 22k Ohms, level 0dBu nominal
- Effects Return Impedance 22k Ohms, input level 0dBu nominal
- H x W x D (mm)645 x 610 x 340
- Weight (kg) 37